Thermik_特密
热敏电阻 Thermistor
Thermik特密是一家来自德国的可靠品牌，凭借卓越品质成为全球同业领导者，其产品系列包含S01、S06、L01、C06等多种选择。
Power class PTC thermistors
Series PTC thermistors
Installation
The PTC’s are usually installed parallel to the coil so that the mechanical strain is minimized. The Mylar-Nomex shrink cap is well suited due to its mechanical stability (no cold flow, as opposed to Tefl on). In conjunction with the miniature pill (Ø 1,5 mm), response times of ≤ 5 seconds to a maximum of 10 seconds were achieved.
Function
Thermik thermistors correspond to DIN 4408, DIN 44082 and IEC 34-11-2, and exhibit a very high temperature sensitivity. The resistance increases strongly in the area of the rated response temperature. This change can be used to switch off the load circuit through a triggering device. Electronic evaluations of many different applications are also possible. The typical characteristics of Thermik thermistors are presented in the temperature resistance diagram.
Advantages:
Small dimensions
Fast response times
Mechanical stability
Temperature-resistance-characteristic-curves individually made for the application
Resistance Diagram
Temperature Resistance Diagram and Primary Parameters as per DIN 44081 / 44082 and IEC 34-11-2
Customer Specific Designs
Design K – customer specific – upon request Possible Variations/Additions:
Colour coding
Wire insulation material or wire cross-section
Cable end packing
Connection technology
UL wire components used
High voltage proof insulation (suited for safety class II applications)
